Click for more products.
No products were found.
   ~ 0 OUT OF 5 STARS   (0)

Share This Category

Bearsden Floating Vanity Support

The Bearsden floating vanity support is designed to support a floating vanity with an additional support arm for a shelf. The Bearsden installs pre-drywall material to the side of the stud with two arms that extend out to support the counter and also provides a shelf support.  The 1" rod is placed 33" from the bottom and provides 20" of support for no greater than a 24" deep counter.  The second 1" support arm is placed at 15" from the bottom and will support a 16" deep shelf.  Perfect for extra storage. A Bearsden floating vanity bracket should be installed on every stud for the length of your counter.

**THIS PRODUCT SHIPS VIA FREIGHT FOR ORDERS OF 3 OR MORE**

Vanity Supports will comply with the Americans with Disabilities Act (ADA) when installed per the requirements of the Accessibility Guidelines, Section 606 Sinks, of the Act.

Product Overview:

  • Sizes: 20x48
  • Finishes: Black 
  • Material Thickness: 1/4" plate, 1" Rod
  • Holes: 4 - 1/4" Straight Holes
  • Screws Not Included
  • Carry Capacity: 200 Pounds

Watch Our Video On: Floating Vanity Installation
Recommended Install Kit:Standard Fastener System Sku 39972

Federal Brace recommends using a vanity support that extends within 4" of the front edge of the vanity. Excessive overhang may cause significant force in a point load situation. Maximum load carrying capacity on vanity support brackets is 200 lbs. with 1/32 deflection.

Product Info Links

Menu

Settings

Click for more products.
No products were found.