Cascata Shower Bench Bracket



The Cascata Hidden Shower Bench Bracket by Federal Brace is designed to hold a solid surface bench of granite, quartz or concrete board and tile. The Cascata bench support has 16" long sides with a short 1.5" down leg that will have the bench appear as if floating out of the wall. Use shims during installation for out of square walls. The Cascata shower bench support can be installed pre-tile or tiled after using proper tools and waterproofing practices.

The Cascata bench support is designed to be relatively hidden while providing the required support for a granite or marble seat and a person’s weight. The 1.5” down flange is used for mounting while the 0.50 L channels act as a gusset and provide the support required. The Cascata also has 14” long sides have a 2” gap in the rear and are designed to fit comfortably in a corner shower setting. Each mounting flange has 3 1⁄4 holes. It is also made of stainless steel material which will add additional corrosion resistance in a wet area.

  • Sizes: 16 x16
  • Finishes: Stainless
  • Material Thickness: 0.25"
  • Holes: 6 - 0.26" Straight Holes
  • Carry Capacity: 300 Pounds Each
  • Fasteners Not Included


Click for more products.
No products were found.