Provencial Hidden Cabinet Bracket



The Provencial Hidden Cabinet Bracket by Federal Brace installs on top of the cabinets with arms extending under the overhang for a floating appearance. The Provencial counter support bracket works with European and standard style base cabinets where routing into cabinets is not an option. 

Place the Provencial Hidden Bracket side by side or no more than 18” apart on the cabinets to support the overhang of heavy stones, including granite and quartz. In order to evenly distribute the weight of the overhang, the bracket is installed in two areas and may require additional substructure blocking to tie into. Check out the installation guide for install instructions. The bracket comes in a size of 36” L x 12”W x .25”H, where of the 36” length, the arms to support the overhang is 12”. It comes in a black powder coat finish. 

This hidden bracket should only be used on cabinet bases where ⅔ of the countertop weight is already supported by a cabinet base. It is also recommended that there is no more than 4” of overhand past the tip of the brackets arm.

  • Sizes: 12x36
  • Finish: Black
  • Material Thickness: 0.25"
  • Holes: 4 - 0.26” Countersunk Holes
  • Carry Capacity: 375 Pounds Each
  • Fasteners Not Included
  • Recommended Fastener Kit: 39988
  • What's in the Box: 1 Provencial Hidden Cabinet Bracket
  • Installation Tip: Use a countertop support that extends to within 4" of the edge of your countertop


Click for more products.
No products were found.